Click image to view full size image
This machine is flowing and continuous type drying equipment firstly made by our factory. The machine is used for drying the piece,tape and particle state materials with good ventilation. The machine is suitable for the materials, such as de-watering de-watering vegetable,herbal medicine of traditional Chinese medicine and others,for which the water content rate is high and the high temperature is not allowed. The machine owns the advantages,that its drying speed is fast,the evaporation strength is high and the product quality is good.The de-watering filtering cake state paste material,after the particle makeing or bar making,can be dried also.
The materials are uniformly put on the mesh-belt by the material charger.The mesh-belt uses generally 12-60 mesh stainless steel wire net and it is drawn and moved inside the direr by a transmission device.The drier is composed of several units,
principle of work
the hot air is circulated separately.Some exhausted gas is discharged with a special moisture elimination blower.The waste gas is controlled through an adjustment valve.The hot air passes through the mesh-belt covered with the material from the top to the bottom or from the bottom to the top and this will complete the heat and mass transfer process.
This process will bring will fall into the material collector continuously.The top and low circulation units can be freely equipped according to the users'demand.The unit number can be selected according to be demand.
E-mail: